1. 430 Stainlss Steel Sheet Product Details

2. FEATURES OF 430 STAINLESS STEEL SHEET AND PLATE:

1. SPECIFICATION:

1) Grade: AISI 430 / SUS 430 / S43000 / STAINLESS STEEL SHEET

2) Shape: 430 TAINLESS STEEL SHEET / Flat Sheet / Plate

3) Treatment: Hot Rolled and Cold Rolled

4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. ( With Paper or PVC film to protection)

5) Thickness Range:

     0.3 - 3mm ( Cold Rolled Process )

     3 - 100mm or more (Hot Rolled Process)

6) Edge: Slit edge & Mill edge

7) Width Range: 601 - 2000mm

8) Length Range: 1000 - 6000mm or as your request

9) 430 Stainlss Steel Sheet Standard Size :

1000mm x 2000mm

1500mm x 3000mm

4' x 8' ----------1220mm x 2348mm

4' x 10'---------1220mm x 3048mm

5' x 10'---------1524mm x 3048mm

5' x 20'---------1524mm x 6096mm

Above is our normal size of 430 stainless steel sheet plate, but are capable of shearing or custom leveling to your required lengths and widths.

10) Available Standard:

     ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc.

     In general, ASTM A240/A240M or as your requirements

11) Certification: MTC and SGS and Any third party inspection

12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Wooden Pallet + Bundle with steel strip)

13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills)

2. TYPICAL APPLICATIONS:

Sinks, sink rims, appliance trim, counter tops, dish washers, range hoods, flatware, architectural uses, roofing, siding and restaurant equipment.

3. CHEMICAL COMPOSITION:

4. MECHANICAL PROPERTIES:

5. FORMING:

Type 430 Stainlss Steel Sheet is readily drawn and formed. Its drawing characteristics are similar to those of low-carbon steel, although it is stronger in the annealed condition and will require stronger tooling and increased power.

6. WELDING:

Type 430 Stainlss Steel Sheet is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to avoid brittle weld fractures during fabrication. When a weld filler is needed, AWS E/ER 308L and 430 are most often specified. Corrosion: This alloy is resistant to attack in a wide variety of corrosive media including nitric acid, and many organic acids.

7.PROCESSING：

Type 430 should be annealed at 1450-1550ºF and furnace cooled at a rate of 50°F per hour to 1100°F and air cooled. If the annealing temperature does not exceed 1450°F (790°C), an air cool may be substituted for the furnace cool when annealing thin sections.

430 TAINLESS STEEL SHEET AND PLATE SHOW:    

Product Chemical Properties:

Product Normal 430 Stainlss Steel Sheet Specification: